Sale

RAYTRONIC C60 CHARGER NEW

  • RAYTRONIC C60 CHARGER NEW
152,10 €
002652
0
Notify about availability

Two independent high-power outputs (500W per channel - with 24V power supply), integrated balancers, a system of great protection and the ability to monitor the process of chargeing/discharging lithium batteries on a computer screen, ensure comfortable and safe operation of all types of batteries available on the market.
The RAYTRONIC C60 is the perfect choice for very demanding professional modelers building flying, circular, floating and other models...

     Technical data of the charger:

. Supply voltage 11 -28V DC. 

. Two independent channels for operation: 1-18 NiCd/NiMH cells, 1-7 Li-Ion/Li- Pol/Li-Fe cells or 2~24V (2V/cell) lead gel batteries Pb.
. Charging current (0,1A - 20,0A) is automatically limited to max 500W/channel (at 24V power supply).
. Discharge current (0,1A - 10,0A) automatically limited to max 50W/channel.
. Automatic termination of the charging process after detection of voltage drop (minus delta-peak) for NiCd and NiMH batteries, (4 charging modes to choose from: AUTOMATIC, NORMAL, LINEAR, RE-FLEX).
. Li-Ion, Li-Pol, Li-Fe and Pb batteries are charged using the "constant current/constant voltage" method.
. Adjustable delta-peak detection sensitivity.
. Forming - cyclic charge/discharge or discharge/charge process for NiCd and NiMH accumulators, max. 10 cycles, time interval programming between cycle phases.
. Memory for 20 charging programs for each channel.
. Backlit LCD display with simple and clear menu, displaying all parameters of charge/discharge process for both channels simultaneously.

. Both channels have an integrated, intelligent balancer for individual voltage compensation of single cells of connected lithium batteries with a tolerance of 5mV/cell during the charging or discharging process. The individual cell voltages of the operated battery are continuously displayed on the charger operation screen.
. Optional temperature sensors can be connected ("TEMP" covered sockets).
. Internal resistance measurement of supported batteries.
. Three built-in cooling fans provide forced, intensive cooling of power components.
. Warning text messages ensure correct operation of the charger in case of incorrect supply voltage (voltage too high or too low), wrong connection, wrong type of battery or its condition, reverse polarity at the output ...
. Protection against polarity change and output short circuit.
. Programmable power consumption limitation for protection against power source overload.
. Programmed percentage of power consumed by the charger for single channels.
. Compact, bent dural sheet metal casing, small dimension

 

    Characteristics:

-Power supply voltage: 11~28V DC
-Supported cells: NiCd, NiMH, Li-Pol, Li-Ion, Li-Fe and Pb
-Working modes: for NiCd, NiMH: Charge, Discharge, Cycle for Li-Pol, Li-Ion, Li-Fe and Pb: Charge, Discharge, Storage
- Charge (Charge) of NiCd, NiMH batteries:

Automatic Mode
Normal mode
Linear mode
Re-Flex Mode

- Charge the Li-Pol, Li-Ion, Li-Fe and Pb batteries:
Constant Current - Constant Voltage

- Discharge:
Automatic mode
Normal mode
Linear mode (only "Linear" mode is available for lithium and lead batteries)
-Storage: charging up to 60% of nominal capacity
-Number of supported cells:
NiCd, NiMH: 1 -18 cells
Li-Pol, Li-Ion, Li-Fe: 1 -7 cells
Pb: 1-12 cells (2 -24V)

-The charging current:
for NiCd, NiMH batteries: 0.1 -20.0A (maximum 300W/channel)
for Li-Pol, Li-Ion, Li-Fe and Pb batteries: 0.1 -20.0A (maximum 300W/channel)

-The discharge current: NiCd, NiMH, Li-Pol, Li-Ion, Li-Fe i Pb: 0.1 -10.0A  

-End discharge voltage:
for NiCd batteries: 0.8 -1.0V/cell and for NiMH batteries: 1.0V/cell, for lithium batteries - if it is not necessary, there is no need to discharge lithium batteries. Please note that the battery Li-Pol or Li-Ion connected to the recharge must have a specific voltage - not less than 3.6V / cell (no load!). Li-Fe batteries are even more sensitive in this respect... the voltage of the Li-Fe battery connected for recharging must not be less than 3.1 - 3.2V/cell (no load!).

-Trickle Current only for NiCd, NiMH batteries: off (OFF) or can be set up to 500mA, 50mA resolution, Automatic -0.05C.
-Forming (Cycle): charge/discharge or discharge/charge - only NiCd, NiMH cells, maximum number of cycles: 10, programmable time interval between cycles: 1-30 minutes.
-Peak Sensitivity: for NiCd batteries: 5 - 25mV/cell for NiMH batteries: 0.3 - 15mV/cell recommended detection sensitivity for NiCd batteries: 8 -15 mV/cell, and for NiMH batteries: 0.5 -10 mV/cell

-Cut-Off Temperature threshold: 10 -65°C or 50 -150°F. For NiCd/NiMH accumulators: 40 -45°C and for lithium accumulators: 35 -40°C.

-Maximum capacity of the supported battery (Max. Capacity): for NiCd, NiMH batteries: 10 -150% for Li-Pol, Li-Ion, Li-Fe batteries: 10 -120%

-Peak Delay: for NiCd and NiMH batteries: 1 -20 min.

-Setting memory: maximum 20/charging channel
-Safety Timer : NiCd, NiMh, Li-Pol, Li-Ion, Li-Fe and Pb: 20 -300 minutes or off (OFF)

-Maximum charging current (Charge Rate):
for NiCd batteries recommended between 1 - 2C
for NiMH batteries recommended maximum level 1C
for Li-Pol batteries, Li-Ion is recommended up to a maximum of 1C (in the default settings, the maximum charging current is programmed to 2C) - unless the manufacturer allows charging with a higher value, e.g. second generation batteries - G2 RAY Li-Pol can be charged up to 2Ca G2 RAY GOLD can be charged up to 6C for Li-Fe batteries: 1 -5C

-Terminal Capacity Selection (TCS-Terminal Capacity Selection):
for Li-Pol, Li-Ion, Li-Fe: 10 -100% of the rated capacity

-The charger's action after reaching the threshold of the preset capacity (TCS End Action).
When the threshold of the preset capacity programmed in the TCS CAPACITY function is reached, the charger can signal this event (ALARM) and continue the charging process (set "CONTI.") or end the charging process (set "STOP").

    Set contains: 

-RAYTRONIC C60 charger
-2 crocodiles (red/black), 2 JST-XH/7S adapters (Kokam, Graupner, RCSystem), 2 PolyQuest adapters (PQ/7S) 2 Raytronic adapters

Strona korzysta z plików cookie w celu realizacji usług zgodnie z Polityką dotyczącą cookies. Możesz określić warunki przechowywania lub dostępu do cookie w Twojej przeglądarce.
Zamknij
pixel